Pistolsmith

Go Back   Pistolsmith > Pistol Forum > Browning Pistols


Reply
 
LinkBack Thread Tools Display Modes
Old 12-21-2001, 09:25 AM   #1
Junior Member
 
Join Date: Nov 2001
Posts: 21
I would like to install a larger safety on my FN hi-power. Can anyone post the instructions and maybe a diagram for this operation? Are there any recomendations as to which safety to purchase and install.
I'm going to leave the original hammer since it has never bitten me. I'v already had sucess replaceing my magazine latch and removeing the magazine safety. Thanks
 
Remove Ads
Old 12-21-2001, 10:07 AM   #2
Senior Member
 
Join Date: Mar 2001
Location: Southwest
Posts: 2,371
Hello. Go to http://www.fnhipower.com and do a search on "detail strip." This will tell you how to remove the safety. From this, you should be able to see how to reassemble. There may be some filing involved on part of the safety to get it to fit, if it's oversized. If you replace with a C&S safety, it will come with instructions on how and where to file.

Best.
 
Old 12-22-2001, 11:50 AM   #3
Junior Member
 
Join Date: Nov 2001
Posts: 21
As far as I can tell there is no search at the hi-power site , but i did find a diagram and some instructions on the Marstar site in Canada. I put a few magazines thru my FN since I removed the magazine safety. The difference is like night and day. A real pleasure to shoot. The groups have tightened up significantly.This gets better and better. This FN is 40 years old and shoots like a dream. The FN hi power is a great gun. Thanks again Mr. Camp
 
Old 12-22-2001, 12:05 PM   #4
Senior Member
 
Join Date: Mar 2001
Location: Southwest
Posts: 2,371
Hello. The search function is at the top of the page at the forum. I tried a search, but only two items came up when I used "detail strip." It appears that some of the older, more detailed works were lost in the site's move. I'm sorry not to've been more help, but am glad you found what you needed.

Maybe a little late, but perhaps the link below would be of use:

http://www.fnhipower.com/manuals/parabe ... htm?page=7
 
Reply

  Pistolsmith > Pistol Forum > Browning Pistols


Search tags for this page

browning hi power safety lever replacement

,

browning hi power safety replacement

,
changing browning hi power safety
,

changing safety lever on hi power

,
directions and safety browning high power
,
how to adjust browning hipower safety
,

how to change safety on browning hi power

,

how to replace a browning hi power safety

,

replacing the safety on a browning hi power


Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
another high power safety mycar47562 Browning Pistols 6 10-30-2011 04:18 PM
Hi Power safety problem. macd Browning Pistols 13 09-11-2011 05:43 PM
looking for Hi-power spur hammer and safety. jon_in_wv Browning Pistols 3 08-05-2005 02:04 PM
Colt 380 Government safety change kikilee Colt Pistols 1 03-06-2005 09:09 AM
Took A Hi Power Out for a Pleasant Change... Stephen A. Camp Browning Pistols 3 06-24-2004 05:20 PM

Top Gun Sites Top Sites List


Powered by vBulletin 3.8.7
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.1
Copyright © 1999-2012 Pistolsmith. All rights reserved.