EoTech and GG&G Help Needed

Willieboy · 08-20-2006, 03:06 PM

I hope you can help me. I mounted my EoTech on my Mini 14 using GG&G's cam operated quick release device. For what seemed to be a pretty simple deal, this has turned out to be a nightmare. My current problem is that after flipping the release lever on the GG&G, the EoTech remains FIRMLY mounted on my rifle. I mean it does not even jiggle. There is little I can see but I believe the dovetail within the EoTech has not moved and is fully engaged with the Ultimak rail. Any ideas as to how to awaken from this particular nightmare? Any thoughts would be appreciated.

exnarc · 07-26-2007, 10:12 PM

first was your rail a mil spec 1913 rail if it is out of spec that could be the prob if not tap and I mean tap with a rubber mallet or other non maring blunt object and see if that looses it up then with the cam in the open position loosen the cam until it locks tight but releases easy

08-20-2006, 03:06 PM	#1
Willieboy Junior Member Join Date: Sep 2004 Posts: 23	EoTech and GG&G Help Needed I hope you can help me. I mounted my EoTech on my Mini 14 using GG&G's cam operated quick release device. For what seemed to be a pretty simple deal, this has turned out to be a nightmare. My current problem is that after flipping the release lever on the GG&G, the EoTech remains FIRMLY mounted on my rifle. I mean it does not even jiggle. There is little I can see but I believe the dovetail within the EoTech has not moved and is fully engaged with the Ultimak rail. Any ideas as to how to awaken from this particular nightmare? Any thoughts would be appreciated.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help needed	steeltoe	M1911 Pistols	13	12-31-2007 06:47 AM
HK-91 mount for aimpoint or EOTech?	Jake Salyards	Semi-Auto Rifles	0	02-16-2004 06:21 AM
HELP NEEDED....	pointman134	Makarov Pistols	1	05-01-2003 11:45 AM
Some help needed	Smitty-1	10mm	2	04-13-2003 03:27 AM
Help Needed!	Big Arm Hannigan	M1911 Pistols	8	10-17-2001 02:12 PM

07-26-2007, 10:12 PM	#2
exnarc Junior Member Join Date: Nov 2005 Posts: 1	first was your rail a mil spec 1913 rail if it is out of spec that could be the prob if not tap and I mean tap with a rubber mallet or other non maring blunt object and see if that looses it up then with the cam in the open position loosen the cam until it locks tight but releases easy