sig p226 accuracy problems

Ranger41 · 05-07-2002, 08:35 AM

I recently acquired a very clean 226 in .357 SIG. I got a good price as the previous owner said he couldn't shoot it accurately. I can't either. I am challenged to keep 5 rds on a 25 yard repair center even from a rest. I can usually hold the black with almost anything offhand. Ammo was Remington factory 125 gr hollowpoint (not the Golden Saber). The bore and crown look good and there is no play when the gun locks up. I can see no obvious reason for the groups I am getting. Any ideas?_______________________________
I should have added that the group spread is almost all on the vertical axis. This seems to suggest inconsistant lock up, but I can find no reason for it.

<font size=-1>[ This Message was edited by: Ranger41 on 2002-05-07 14:12 ]</font>

securitysix · 05-07-2002, 11:42 AM

You might try some of the el-cheapo Winchester white box ammo too. Also, pull your target back in to about 10 yards and see if you can hit paper there and what the POI is at that distance.

Ranger41 · 05-10-2002, 10:15 AM

Update - Today I installed the .40 S&W barrel and the gun produced excellent groups. Apparently the .357 SIG barrel (or my choice of ammo) is the source of the poor accuracy.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Accuracy problem!!!!g-17l	TT GLOCKS	Glock Pistols	4	05-26-2010 08:27 AM
Accuracy Problem	mortonspoint	Dan Wesson Revolvers	1	04-03-2006 05:41 AM
P1 Accuracy Problem	tblshoot	Walther Pistols	1	02-21-2004 10:44 AM
FEG PJK: problem w/ accuracy	Francis Sawyer	Browning Pistols	7	06-13-2002 03:46 AM
Pistol Accuracy Vs Rifle Accuracy	Bill Caldwell	Pistolsmiths	8	12-21-2001 01:52 PM

accuracy of sig p 226 357 sig

p226 accuracy problem

p226 accuracy problems

p226 poor accuracy

sig p226 accuracy problems

05-07-2002, 08:35 AM	#1
Ranger41 Senior Member Join Date: May 2002 Location: King George, VA Posts: 134	I recently acquired a very clean 226 in .357 SIG. I got a good price as the previous owner said he couldn't shoot it accurately. I can't either. I am challenged to keep 5 rds on a 25 yard repair center even from a rest. I can usually hold the black with almost anything offhand. Ammo was Remington factory 125 gr hollowpoint (not the Golden Saber). The bore and crown look good and there is no play when the gun locks up. I can see no obvious reason for the groups I am getting. Any ideas?_______________________________ I should have added that the group spread is almost all on the vertical axis. This seems to suggest inconsistant lock up, but I can find no reason for it. <font size=-1>[ This Message was edited by: Ranger41 on 2002-05-07 14:12 ]</font>

05-07-2002, 11:42 AM	#2
securitysix Junior Member Join Date: Mar 2002 Posts: 7	You might try some of the el-cheapo Winchester white box ammo too. Also, pull your target back in to about 10 yards and see if you can hit paper there and what the POI is at that distance.

05-10-2002, 10:15 AM	#3
Ranger41 Senior Member Join Date: May 2002 Location: King George, VA Posts: 134	Update - Today I installed the .40 S&W barrel and the gun produced excellent groups. Apparently the .357 SIG barrel (or my choice of ammo) is the source of the poor accuracy.