10mm slide stop

tkosiba · 04-14-2008, 09:19 AM

I believe I've read somewhere that slide stops (and their related angles) are different for .45, 10mm/.40 and 38 Super (initiated by Colt). Usually, everyone just recommends a Wilson 38 Super slide stop for a 10MM 1911; however, with Kimber and Dan Wesson making 10MM, has anyone noticed if their 10MM slide stops are different than their 38 Super's?

10mm · 04-17-2008, 10:44 AM

I do not have the answer but I would almost bet that they just use the 38 Super slide stops. On some 10mm guns you will need to alter the 9mm/.38S slide stop for proper function but it is not a big deal. The difference on them is the sub-.45 caliber slide stops have more material so they reach far enough in to be engaged by the magazine follower after the last round is fired.

jakes10mm · 08-02-2008, 10:34 AM

I'm not sure about a difference either, but...the EGW Oversized Slide Stop in my Delta has been working fine. I believe it was a "45acp" part. I've been installing EGW's Match Bushing and OS Slide Stop on all my 1911's. The combination has reaped accuracy gains in all with less than a $50 investment.

04-14-2008, 09:19 AM	#1
tkosiba Member Join Date: Aug 2003 Location: Winfield, IL Posts: 58	10MM Slide Stop I believe I've read somewhere that slide stops (and their related angles) are different for .45, 10mm/.40 and 38 Super (initiated by Colt). Usually, everyone just recommends a Wilson 38 Super slide stop for a 10MM 1911; however, with Kimber and Dan Wesson making 10MM, has anyone noticed if their 10MM slide stops are different than their 38 Super's?

08-02-2008, 10:34 AM	#3
jakes10mm Senior Member Join Date: Apr 2003 Posts: 231	Re: 10MM Slide Stop I'm not sure about a difference either, but...the EGW Oversized Slide Stop in my Delta has been working fine. I believe it was a "45acp" part. I've been installing EGW's Match Bushing and OS Slide Stop on all my 1911's. The combination has reaped accuracy gains in all with less than a $50 investment.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What slide stop	harley45	10mm	6	07-17-2004 02:24 PM
P-16-40 Slide stop	Joe Ford	Para-Ordnance Pistols	1	06-15-2004 03:48 PM
Slide stop	Gordon Hulme	Workshop	2	10-31-2002 07:29 AM
Slide Stop Pin	Gonzo	Workshop	3	02-23-2002 12:53 PM
S-A slide stop mod	Coop de Ville	Workshop	3	05-28-2001 09:56 AM

10mm 1911 slide stop

10mm 1911 slide stop scratching rounds

10mm slide stop

1911 10mm slide stop

1911 slide stop 10mm

1911 slide stop for 10mm

45 slide stop in 40 1911

slide stop for 10mm 1911

which slide stop for 1911 10mm

04-17-2008, 10:44 AM	#2
10mm Senior Member Join Date: Oct 2001 Location: Delta, PA Posts: 233	I do not have the answer but I would almost bet that they just use the 38 Super slide stops. On some 10mm guns you will need to alter the 9mm/.38S slide stop for proper function but it is not a big deal. The difference on them is the sub-.45 caliber slide stops have more material so they reach far enough in to be engaged by the magazine follower after the last round is fired.