22l conversion

cado223 · 02-15-2005, 05:26 PM

I have a Colt 22L.R. Conversion Unit that was removed from a Colt Series 70 45A.C.P. frame, and I can´t fit this Conversion on a Colt Super 38 frame. Are this two frames diferent? Seems that the rear finger on the 38 frame is taller that the one on the 45. Thanks.

carlos

Bompa · 08-13-2005, 06:10 PM

The ejector on the 38 super is wider,the slot in the slide is not wide enough to permit the ejector to pass through..You can have the slot in the slide opened or just remove the ejector when you want to use the conversion kit..
Not really a big deal,I opened the slot in my Cienier kit and it works fine
with 9mm,38super and 45acp..

easy · 05-20-2006, 07:50 PM

I use an old colt conversion on a delta elite. The best I remember the disconect on the newer frame didnt let the slide work until I milled a slot in the older slide to let it pass the disconect.

02-15-2005, 05:26 PM	#1
cado223 Join Date: Feb 2005 Posts: 4	22L.R. Conversion Unit!!! I have a Colt 22L.R. Conversion Unit that was removed from a Colt Series 70 45A.C.P. frame, and I can´t fit this Conversion on a Colt Super 38 frame. Are this two frames diferent? Seems that the rear finger on the 38 frame is taller that the one on the 45. Thanks. carlos

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kimber Conversion Unit	riptidenj	Kimber Pistols	2	02-27-2013 06:58 AM
Sig .22 conversion unit	jeff22	SIG Pistols	2	09-09-2012 02:51 AM
Colt Ace II .22 Conversion Unit	Bob Brown	Colt Pistols	9	05-10-2005 08:47 AM
Dot sight on Kadet conversion unit?	pevadijk	CZ Pistols	1	11-18-2004 08:35 AM
Kimber Conversion Unit	riptidenj	Colt Pistols	0	12-31-1969 07:00 PM

22l conversion

colt ace ii

colt ace ii conversion

08-13-2005, 06:10 PM	#2
Bompa Join Date: May 2001 Posts: 42	The ejector on the 38 super is wider,the slot in the slide is not wide enough to permit the ejector to pass through..You can have the slot in the slide opened or just remove the ejector when you want to use the conversion kit.. Not really a big deal,I opened the slot in my Cienier kit and it works fine with 9mm,38super and 45acp..

05-20-2006, 07:50 PM	#3
easy Join Date: Jan 2006 Posts: 4	I use an old colt conversion on a delta elite. The best I remember the disconect on the newer frame didnt let the slide work until I milled a slot in the older slide to let it pass the disconect.