1911 magazine bumper pads

seimper · 02-03-2004, 06:24 PM

I'm looking for a good site to order 1911 magazine bumper pads. I would prefer the amaller pads that are about 1/2 inch thick and the screw in type. Anyone know of a good site that I can order these from?
Thanks

Black_Talon · 02-04-2004, 06:47 PM

I like the Kings Gunworks #308A bumper pads. They're about 1/2" thick and they come in nifty colors. Being the boring lad that I am, I go for the black or gray ones though.

The Shootist · 02-05-2004, 11:28 AM

Brownells (800) 741-0015 has sold me dozens of these items. They carry about 6 or 7 kinds but the best ones are made by Pachmayer. They even come with a little jig to make sure you drill the holes in the right place on the mag. base pad.

Retail price for a kit with 5 bumpers is $13.98 or just under $10 for FFLs and Instructors.

Their part number is 692-700-000

Good Luck.

SA1911 · 02-09-2004, 07:25 AM

I just ordered a bunch of these from a guy off eBay - 11 for $1.

They don't come with screws, but you can get the screws at pretty much any Home Depot or hardware store for 10 cents each. Sure beats the regular price of $1 or more per pad. These appear to be the regular pads, not some of the specialty types, and are black.

I am not affiliated with the seller, a gun store in Texas, but I thought others might be interested in this deal.

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... gory=36258

Number 6 · 02-09-2004, 12:48 PM

I don't use the screws. Too much like work to install; too much to remove the pad for mag disassembly.

I use body side molding tape, available at any auto parts store. One roll will last you a lifetime; you don't need jigs, and the dense foam tape helps absorb the shock when you drop the mags. :wink:

02-03-2004, 06:24 PM	#1
seimper Join Date: Dec 2003 Posts: 1	1911 magazine bumper pads I'm looking for a good site to order 1911 magazine bumper pads. I would prefer the amaller pads that are about 1/2 inch thick and the screw in type. Anyone know of a good site that I can order these from? Thanks

02-09-2004, 07:25 AM	#4
SA1911 Join Date: Jan 2004 Posts: 10	1911 Magazine base pads on eBay I just ordered a bunch of these from a guy off eBay - 11 for $1. They don't come with screws, but you can get the screws at pretty much any Home Depot or hardware store for 10 cents each. Sure beats the regular price of $1 or more per pad. These appear to be the regular pads, not some of the specialty types, and are black. I am not affiliated with the seller, a gun store in Texas, but I thought others might be interested in this deal. http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... gory=36258

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1911 Magazine dimensions?	Shorts	Holsters and Belts	3	06-01-2008 05:42 PM
Best 9mm 1911 Magazine?	Bill Go	Pistolsmiths	6	11-05-2003 03:09 PM
Blackening magazine base-pads.	Zak Smith	Browning Pistols	3	03-15-2003 02:47 PM
magazine base pads	Pro Carry Paul	Gun Accessories	1	03-28-2002 12:43 AM
BCP 1911 In GUNS Magazine	Desert Dog	Pistolsmiths	26	07-07-2001 02:40 PM

1911 bumper pads

1911 mag bumper pads

1911 mag bumpers

1911 magazine bumper pad

1911 magazine bumper pads

1911 magazine bumpers

bumper pads for 1911 mags

kimber magazine bumper pads

magazine bumper pads

02-04-2004, 06:47 PM	#2
Black_Talon Member Join Date: Feb 2003 Location: Peoples Republik of Kalifornia Posts: 88	I like the Kings Gunworks #308A bumper pads. They're about 1/2" thick and they come in nifty colors. Being the boring lad that I am, I go for the black or gray ones though.

02-05-2004, 11:28 AM	#3
The Shootist Join Date: Dec 2002 Posts: 204	Brownells (800) 741-0015 has sold me dozens of these items. They carry about 6 or 7 kinds but the best ones are made by Pachmayer. They even come with a little jig to make sure you drill the holes in the right place on the mag. base pad. Retail price for a kit with 5 bumpers is $13.98 or just under $10 for FFLs and Instructors. Their part number is 692-700-000 Good Luck.

02-09-2004, 12:48 PM	#5
Number 6 Join Date: Sep 2001 Posts: 520	I don't use the screws. Too much like work to install; too much to remove the pad for mag disassembly. I use body side molding tape, available at any auto parts store. One roll will last you a lifetime; you don't need jigs, and the dense foam tape helps absorb the shock when you drop the mags. :wink: