Colt Pre-Woodsman jammed shut

22913 · 01-09-2017, 10:05 AM

I very recently acquired a Colt Pre-Woodsman via an on-line auction. I have not even fired it yet. Today I was pulling back the slide to lock it open to inspect the barrel, and the slide did not want to open. It was cocked and on safe, so I took off the safety and dry-fired the trigger. I don't recall doing anything else, but the slide now definitely will not retract. Has anyone ever encountered this kind of jam up? (There is no shell in there.)

dfariswheel · 01-09-2017, 04:31 PM

You need a Colt .22 auto expert.
They hang out on the Colt Forum.

Post this over there and one of them will help you figure out what's going on:

Colt Forum

22913 · 01-10-2017, 12:43 PM

Good advice. I immediately ran into the world's top Woodsman expert over there. We got together on the phone and, with him instructing, I disassembled and reassembled the gun, and it now works fine. Thanks.

01-09-2017, 10:05 AM	#1
22913 Junior Member Join Date: Jun 2016 Location: US Posts: 3	Colt Pre-Woodsman jammed shut I very recently acquired a Colt Pre-Woodsman via an on-line auction. I have not even fired it yet. Today I was pulling back the slide to lock it open to inspect the barrel, and the slide did not want to open. It was cocked and on safe, so I took off the safety and dry-fired the trigger. I don't recall doing anything else, but the slide now definitely will not retract. Has anyone ever encountered this kind of jam up? (There is no shell in there.)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-09-2017, 04:31 PM	#2
dfariswheel Senior Member Join Date: Jun 2001 Posts: 1,801	You need a Colt .22 auto expert. They hang out on the Colt Forum. Post this over there and one of them will help you figure out what's going on: Colt Forum

01-10-2017, 12:43 PM	#3
22913 Junior Member Join Date: Jun 2016 Location: US Posts: 3	Good advice. I immediately ran into the world's top Woodsman expert over there. We got together on the phone and, with him instructing, I disassembled and reassembled the gun, and it now works fine. Thanks.