novak sights for cz 75

recon5 · 07-04-2004, 09:59 AM

Hi,
I want to install Novak sights on my CZ75.
I know some here also have them. Since Novak don't state a model specifficly for CZ wich model do you have? I guess either the 1911 or FN HP model?
What front sights do you use?
I it a complicated conversion?
Thank you.

Eric Larsen · 07-04-2004, 11:58 AM

I know that if you send the gun back to Novak they can install them and get it right.......
If you want the cheaper option you can get PT nights for your CZ and its a drop in change over. The sights look very very much like the Novak Low Mounts.......
Shoot well.

recon5 · 07-04-2004, 01:00 PM

Sending my gun to Novak isn't an option a'm afraid, i live in Europe...

Walt Sherrill · 07-04-2004, 03:27 PM

Email Novak at: [email protected]

Eric's suggestion may be your best bet.

The CZ front sight is a real problem for some sight makers, as CZs have a length-wise dovetail that not every sight maker can "fit."

Eric installed the PT version of Novaks on a gun I bought from him, and they work with the existing CZ front sights. (If you want night sights, you can get a front night from them, too.)

recon5 · 07-06-2004, 07:51 AM

I just got a reply from Novak. They said they were aware some pistolsmith's are putting their sights on CZ's but dont know what model they're using or how it's done, they couldn't help me.

I'm gonna use A LPA set i guess. Has anyone used a LPA TTF fiber optic set? There is a set specially for CZ 75. :wink:
http://www.lpasights.com/catalogTTF.html

07-09-2004, 09:03 AM

I had Novak put his Trijicon night sights on my CZ75 and they work great. I will admit it wasn't cheap. The sights and installation cost me $300. Regards, Richard

recon5 · 07-09-2004, 10:17 AM

This is the nightsight version of the Novak's?
I sa on the Trijicon site they too have replacement (nightsights) for the CZ 75.
I'm gonna look if they're available here and what they cost.

Sherman Parish · 07-09-2004, 10:48 AM

Ive only seen this done on a Pre B CZ. I was also under the impression that Novak's shop would not touch a CZ.

recon5 · 07-09-2004, 10:50 AM

Aha, discrimination (hehe).

Walt Sherrill · 07-09-2004, 12:16 PM

PT makes night sights that look very much like the Novaks. And they'll fit the stock front and rear dovetails. (I've got a set.) I've been concerned about their longevity -- having had one set fail, myself, and friends having others -- but these seem to be holding up fine.

07-04-2004, 09:59 AM	#1
recon5 Join Date: Jul 2004 Posts: 10	Novaks on CZ 75 Hi, I want to install Novak sights on my CZ75. I know some here also have them. Since Novak don't state a model specifficly for CZ wich model do you have? I guess either the 1911 or FN HP model? What front sights do you use? I it a complicated conversion? Thank you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Novaks Gunsmithing?	leo77	Smith & Wesson Pistols	1	06-16-2011 05:36 PM
Novaks Gunsmithing?	leo77	Pistolsmiths	0	06-16-2011 05:32 PM
Novaks Hi Power	DBL-TAP	Browning Pistols	4	12-03-2005 11:34 PM
Returned from Novaks	rocknrollrjm	Pictures	9	03-23-2003 02:56 PM
Can a set of Novaks be fit to this slide?	Sherman Parish	Browning Pistols	3	08-05-2002 06:38 PM

cz 75 sights

cz 75 sights novak

cz 75b novak sights

cz75 novak sights

novak cz sights

novak sights cz 75

novak sights for cz 75

novak sights for cz 75b

novak sights for cz75b

07-04-2004, 11:58 AM	#2
Eric Larsen Join Date: Feb 2002 Posts: 311	I know that if you send the gun back to Novak they can install them and get it right....... If you want the cheaper option you can get PT nights for your CZ and its a drop in change over. The sights look very very much like the Novak Low Mounts....... Shoot well.

07-04-2004, 01:00 PM	#3
recon5 Join Date: Jul 2004 Posts: 10	Sending my gun to Novak isn't an option a'm afraid, i live in Europe...

07-04-2004, 03:27 PM	#4
Walt Sherrill Senior Member Join Date: Apr 2001 Location: Winston-Salem, NC Posts: 229	Email Novak at: [email protected] Eric's suggestion may be your best bet. The CZ front sight is a real problem for some sight makers, as CZs have a length-wise dovetail that not every sight maker can "fit." Eric installed the PT version of Novaks on a gun I bought from him, and they work with the existing CZ front sights. (If you want night sights, you can get a front night from them, too.)

07-06-2004, 07:51 AM	#5
recon5 Join Date: Jul 2004 Posts: 10	I just got a reply from Novak. They said they were aware some pistolsmith's are putting their sights on CZ's but dont know what model they're using or how it's done, they couldn't help me. I'm gonna use A LPA set i guess. Has anyone used a LPA TTF fiber optic set? There is a set specially for CZ 75. :wink: http://www.lpasights.com/catalogTTF.html

07-09-2004, 09:03 AM	#6
Guest Posts: n/a	I had Novak put his Trijicon night sights on my CZ75 and they work great. I will admit it wasn't cheap. The sights and installation cost me $300. Regards, Richard

07-09-2004, 10:17 AM	#7
recon5 Join Date: Jul 2004 Posts: 10	This is the nightsight version of the Novak's? I sa on the Trijicon site they too have replacement (nightsights) for the CZ 75. I'm gonna look if they're available here and what they cost.

07-09-2004, 10:48 AM	#8
Sherman Parish Senior Member Join Date: Sep 2001 Posts: 883	Ive only seen this done on a Pre B CZ. I was also under the impression that Novak's shop would not touch a CZ.

07-09-2004, 10:50 AM	#9
recon5 Join Date: Jul 2004 Posts: 10	Aha, discrimination (hehe).

07-09-2004, 12:16 PM	#10
Walt Sherrill Senior Member Join Date: Apr 2001 Location: Winston-Salem, NC Posts: 229	PT makes night sights that look very much like the Novaks. And they'll fit the stock front and rear dovetails. (I've got a set.) I've been concerned about their longevity -- having had one set fail, myself, and friends having others -- but these seem to be holding up fine.