Stock II Transfer Bar Mod? - Pistolsmith
Pistolsmith

Go Back   Pistolsmith > Pistol Forum > CZ Pistols

Reply
 
LinkBack Thread Tools Display Modes
Old 01-25-2013, 01:33 PM   #1
Junior Member
 
smokemup's Avatar
 
Join Date: Nov 2012
Location: NC
Posts: 3
Stock II Transfer Bar Mod?

As you know, the Stock II is a DA/SA setup. I've stoned the sear and hammer and now have a short crisp break. However, I'd like some ideas on reducing the take up (travel), especially in SA mode. I experimented with a thin spacer between the interrupter and the rear of the trigger bar, and that worked. I decided an ideal solution would be to drill and tap a hole for a #2/56 oval-end set screw. I could not find anyone to take on the drilling project because of that outer angle and tight tolerance for a #2 screw. Well, one guy said he could probably do it, but he estimated $140 to drill and tap a hole. He'd have to build a wooden jig, etc., so, moving on.... I thought about Tig welding some steel to the inside of the trigger bar (where the interrupter fits), and filing it down to suit. I tested this 'theory' with JB Weld, as it's not permanent. Dang if I didn't file too much JB off, but it did reduce the take-up. In DA, it stacks terribly and feels a little 'bumpy?' near the end. Probably the JB Weld.

So anyway, that's where I'm at and looking for more ideas or to see if anyone has had any luck with this. BTW, honing out the plunger bore, polishing the contact surfaces, and using a lighter spring, has resulted in a perfectly smooth take-up, and I'm extremely critical, so happy with that part.

Tnx for any advice.

Last edited by smokemup; 01-25-2013 at 01:35 PM.
 
Remove Ads
Reply

  Pistolsmith > Pistol Forum > CZ Pistols

Tags
stock, takeup, tanfoglio, trigger, witness


Search tags for this page

jb weld m14

,

pistolsmith for stock 2

,

taking the interrupter out of a da witness pistol

,

tanfoglio trigger spring

,

witness stock 2 mods

Click on a term to search for related topics.

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Please help! CZ Champion Private Transfer in CA skycz CZ Pistols 6 11-13-2003 01:17 PM
Trying to get stock off of AR-15 MessedUpMike Workshop 2 09-29-2002 10:13 AM
FFL Transfer only between FFLs ChrisKinsman Gun Talk 10 09-19-2002 06:05 AM
10% for transfer, right or wrong? (long) birddog007 Gun Talk 39 06-08-2002 10:15 AM
FFL Transfer only between FFLs ChrisKinsman Gun Talk 10 12-31-1969 07:00 PM

Top Gun Sites Top Sites List


Powered by vBulletin 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright © 1999-2012 Pistolsmith. All rights reserved.