Dan Wesson Forum

[DanFriemoth]

Have you checked the Dan Wesson site? there is an area that is "forum" like.

[Jim Richardson]

Originally Posted by Dave Berryhill

Hmmmmm. I'm still waiting for those Dan Wesson revolver posts to come pouring in. :-?

Usually, posts seem to deal with problems. Unfortunately, my DW wheelguns have never given me any troubles. But as soon as they do I plan on comming here to bitch.

[stansdds]

Back when I had my model 15-2, it gave me exactly two problems. The first time the cylinder became almost impossible to open and close, cleaned under the extractor and that problem was solved. The second problem was a sudden down turn in accuracy. I found out it was very important to have the barrel nut properly torqued, othewise it can unscrew and the barrel will begin to wobble a little.

[MP1SG]

Originally Posted by west_virginia_kimber

there are many rude people over there. i think that forum has turned into a bashing ground, where moderators and the people who give a few pennies to the forum run things.

Not true on the DW section. Pretty good bunch of guys there. Now on the other sections there can be some a-holes, especially in the Kimber area.

[John Clark]

I bought one in the early 80's with an 8 inch barrel, I should have gotten the whole pack with the carrying case but I was too cheap.
ops:
Since then I've bought 2 barrels, 4 and 6 inch with vent rib shrouds from gunbroker.com.

[Jim Richardson]

Originally Posted by Dave Berryhill

Hmmmmm. I'm still waiting for those Dan Wesson revolver posts to come pouring in. :-?

The problem is that there is just nothin to bitch about with the DW wheelies. They work. What else is there to say?

[DanWessonRevo]

This should be enough for a bit:

http://www.go2gbo.com/forums/index.php/board,83.0.html

http://www.danwessonforum.com/

http://sports.groups.yahoo.com/group/danwesson/

http://forums.1911forum.com/forumdisplay.php?f=52