Hi-Standard Supermatic problem - Page 2 - Pistolsmith

Go Back   Pistolsmith > Pistolsmith Forum > Gun Talk

Like Tree2Likes
LinkBack Thread Tools Display Modes
Old 11-05-2013, 06:22 PM   #11
Junior Member
Join Date: Oct 2013
Location: Athens, TN
Posts: 6
Wink All finished and working great!

Received the new hammer and installed it thinking it was a drop in but noooooo, it requires some work as it would not even cock. I had looked at the old hammer and thought that it could be ground to work properly but had hoped the new one would be just a drop in. Wrong........ So since I had to do the same modification to the new hammer I decided to work the old hammer instead. I removed some of the hammer material to allow the sear to set deeper when cocked. Put it all back together. When I released the slide after cocking the gun it remained cocked....whoopie. Took two magazines out to my shooting spot, loaded 2 shells in the first magazine and fired them both. All worked well. loaded the remaining clip with 9 rounds and fired all of them. Perfect! So this gun still has all it's original parts, and I have a new hammer and plunger to sell on Ebay. But the repair is complete, and I am very pleased with this Hi-Standard Supermatic Trophy.
I can't believe that the folks at Hi-Standard would have released this gun for sale with the hammer fitted the way it was. So I am back to my original thoughts that someone did a bad trigger job on it by modifing the hammer. It had been taken apart previously, by someone who didn't use gunsmith screwdrivers. The tale-tell boogering of the screw slots. A pet peave of mine.
Remove Ads
Old 11-05-2013, 06:39 PM   #12
Senior Member
Join Date: May 2006
Location: near Huntsville, Ala.
Posts: 707
Good for you. Might be a good idea to get some casehardening stuff from Brownell's for the hook(s) if you are finished with them. If you don't harden it/them, they will wear down.
larry630 likes this.

  Pistolsmith > Pistolsmith Forum > Gun Talk

Search tags for this page
hard to pull slide on high standrd pistol
hi standard pistol trigger pull
high standard 22 not cocking
high standard citation plunger

high standard mod 107 sear adjustment screw


high standard model 101-107 sear adjustment

high standard pistol sear adjustment
high standard supermatic trophy 104

trigger pull adjustment for hi standard 22 lr

Click on a term to search for related topics.

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
XS Standard Dot on 640-3 j-framer Smith & Wesson Revolvers 3 11-15-2007 07:02 PM
Need parts for HS Supermatic FK101 HiFlight Gun Talk 3 02-25-2006 09:10 PM
Standard SIG 220 +P or NO +P Ty SIG Pistols 2 09-13-2005 06:51 AM
how to clean a high standard supermatic tourment .22? raider1v1 Gun Talk 2 04-02-2003 02:59 PM
Misfires in cold weather, primer problem? Gun problem? Stomper Reloading 6 03-08-2002 10:56 AM

Top Gun Sites Top Sites List

Powered by vBulletin 3.8.8
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright © 1999-2012 Pistolsmith. All rights reserved.