22 short magazine

twidle · 10-13-2013, 03:23 PM

I'm looking for someone who may be able to modify a magazine to match an original HS .22 short magazine were the ejector is part of the magazine. It doesn't appear it would be that difficult, but would require welding/soldering a small piece of metal. Pictures of what's required are available. I have searched many years for a original and never have come close to finding one.

dfariswheel · 10-13-2013, 07:44 PM

One good gunsmith who seems to be able to get to work fast is Frank Glenn in Arizona.
There are other shops that can do the job but most are heavily booked and tend to be very expensive.
Another top shop is Cylinder & Slide Shop, but they'll be slow and costy.
APW/Cogan is primarily a refinisher service but offers top quality gunsmithing:

Frank Glenn-Glenn Custom Complete Gunsmithing Service Glendale AZ

Cylinder & Slide Inc

ACCURATE PLATING AND WEAPONRY | APWCOGAN

wv109323 · 12-30-2020, 03:06 PM

Get on Rimfire Central forum and go to the High Standard section. Alan Aerostein has acquired and manufactures HS pistols. He was a former executive at the original HS. He may be able to help or know someone who can help.

10-13-2013, 03:23 PM	#1
twidle Junior Member Join Date: Oct 2013 Location: Paramus, NJ Posts: 1	HS .22 short magazine fix I'm looking for someone who may be able to modify a magazine to match an original HS .22 short magazine were the ejector is part of the magazine. It doesn't appear it would be that difficult, but would require welding/soldering a small piece of metal. Pictures of what's required are available. I have searched many years for a original and never have come close to finding one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I cut it twice, and it's still too short!!!!	Shane1911	Workshop	5	01-08-2003 06:48 PM
300 short mag help	gilp	Big Bore Rifles	0	12-13-2002 06:18 AM
rem 300 short mag	gilp	Big Bore Rifles	4	12-09-2002 09:02 AM
BCP Short Trigger #017	n2299	Gun Accessories	2	09-18-2002 01:19 PM
Kahr P9 Magazine Release & Magazine Hang-up ???	Slug Gun	Kahr Pistols	4	04-25-2002 04:39 AM

10-13-2013, 07:44 PM	#2
dfariswheel Senior Member Join Date: Jun 2001 Posts: 1,801	One good gunsmith who seems to be able to get to work fast is Frank Glenn in Arizona. There are other shops that can do the job but most are heavily booked and tend to be very expensive. Another top shop is Cylinder & Slide Shop, but they'll be slow and costy. APW/Cogan is primarily a refinisher service but offers top quality gunsmithing: Frank Glenn-Glenn Custom Complete Gunsmithing Service Glendale AZ Cylinder & Slide Inc ACCURATE PLATING AND WEAPONRY \| APWCOGAN

12-30-2020, 03:06 PM	#3
wv109323 Junior Member Join Date: Dec 2020 Location: Lenore WV Posts: 3	Get on Rimfire Central forum and go to the High Standard section. Alan Aerostein has acquired and manufactures HS pistols. He was a former executive at the original HS. He may be able to help or know someone who can help.