recoil spring on kahr during dissasembly - Pistolsmith
Pistolsmith

Go Back   Pistolsmith > Pistol Forum > Kahr Pistols

Reply
 
LinkBack Thread Tools Display Modes
Old 11-27-2003, 08:26 PM   #1
 
Join Date: Mar 2003
Posts: 32
recoil spring on kahr during dissasembly

the factory has warnings in the manual saying not to dissasemble the recoil spring guide...oops! i did. every other pistol it's ok to do on, but, not the Kahr??? HUGE warning to not do this and, if installed improperly can result in INJURY?? Judging from the instructions, the diagrams in the manual and what Bill Wilson said about recoil guide springs, I assembled the Kahr with the 'open ended' part of the spring closest to the muzzle and the 'close ended' part of the spring at the rear of the recoil spring guide, closest to the breech, trigger, etc. did i do it right? what's the deal with this and Kahr?

Thanks,
DB
 
Remove Ads
Old 11-27-2003, 09:56 PM   #2
Senior Member
 
Join Date: Jun 2001
Posts: 1,800
Large end forward, small end to the rear is the standard, but Kahr may be different.

Before shooting it, CONTACT Kahr. Phone or email.

Most modern gun manuals have warnings about disassembling past a certain point. These are sometimes attempts to keep "Bubba" from being unable to get his gun back together, and sometimes there's a specific reason not to disassemble something.

Generally, unless you're a qualified gunsmith, or have the skills of one.....follow the manual.
 
Reply

  Pistolsmith > Pistol Forum > Kahr Pistols


Search tags for this page

do not disassemble kahr recoil spring and rod

,

kahr pm9 disassembly instructions

,

recoil spring guide kahr mk40

Click on a term to search for related topics.

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
kahr mk40 recoil spring captbahbah Kahr Pistols 1 07-29-2010 07:48 PM
I hate my Kahr's non-captive recoil spring nick__45 Kahr Pistols 0 09-23-2007 08:19 AM
HP recoil spring and reduced hammer spring. markb Browning Pistols 5 12-02-2005 09:00 PM
recoil spring JOEE 9x23mm 2 01-27-2002 01:03 PM

Top Gun Sites Top Sites List


Powered by vBulletin 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright © 1999-2012 Pistolsmith. All rights reserved.