best lube for a kahr cm9

wmg · 10-16-2014, 05:30 PM

new owner.... was wondering what everyone uses to keep things moving smoothly

coverdog · 10-26-2014, 10:35 AM

I use grease on the slide and weapon shield or clp on all other metal moving parts. Nothing on the firing pin.

dfariswheel · 10-26-2014, 05:47 PM

Pick a gun lubricant. Try it. If it works for you, you're done, move on to more important things.

Seriously, no subject is more debated on the gun forums, and with less effect.
Gun lubes are purely a matter of personal preference and experience.
There are no "miracle lubricants" and no lubricant stands above any other.
What one person thinks is the very best will not satisfy another.

The advice about using a little grease on slide and frame rails and the barrel of auto pistols is good.
A good grease will not run off or evaporate like most liquid lubes will.

wmg · 10-29-2014, 05:44 PM

Tnx for the info.....i will put it to good use..

BILLYMAC · 11-02-2014, 04:53 PM

I use synthetc motor oil, does not seem to go burn away like some oils and stays put. 20 weight works great mobil one. For grease i use a molybidium white grease. Please excuse the spelling.
Billymac

wmg · 11-07-2014, 12:36 PM

tnx for the reply...been using that oil for everything else will give it a go...

spentcase · 12-27-2014, 10:15 AM

I would echo what others say about quality lubes. They all work effectively. I use FP10 on both polymer and steel/alloy guns and have had no problems on any of them.

10-16-2014, 05:30 PM	#1
wmg Junior Member Join Date: Oct 2014 Location: va Posts: 7	best lube for a pm9 new owner.... was wondering what everyone uses to keep things moving smoothly

10-29-2014, 05:44 PM	#4
wmg Junior Member Join Date: Oct 2014 Location: va Posts: 7	tnx Tnx for the info.....i will put it to good use..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Preference: FP-10 or M-Pro 7 gun lube?	mnovack	Gun Talk	4	07-11-2006 02:14 PM
Lube	USA-1	M1911 Pistols	3	10-03-2003 08:59 AM
Need .456 or .457 Lyman lube die for Lyman 450 lube press	44and45	Reloading	1	03-29-2003 10:56 PM
The Right Lube for USP	hunter44	Heckler & Koch Pistols	11	02-15-2002 09:52 AM
Tetra Gun lube...		Gun Accessories	6	11-26-2001 03:03 PM

best lube for a kahr cm9

best lube kahr

best lubricant for kahr pm9

10-26-2014, 10:35 AM	#2
coverdog Junior Member Join Date: Dec 2003 Posts: 29	I use grease on the slide and weapon shield or clp on all other metal moving parts. Nothing on the firing pin.

10-26-2014, 05:47 PM	#3
dfariswheel Senior Member Join Date: Jun 2001 Posts: 1,801	Pick a gun lubricant. Try it. If it works for you, you're done, move on to more important things. Seriously, no subject is more debated on the gun forums, and with less effect. Gun lubes are purely a matter of personal preference and experience. There are no "miracle lubricants" and no lubricant stands above any other. What one person thinks is the very best will not satisfy another. The advice about using a little grease on slide and frame rails and the barrel of auto pistols is good. A good grease will not run off or evaporate like most liquid lubes will.

11-02-2014, 04:53 PM	#5
BILLYMAC Junior Member Join Date: Jan 2014 Location: PORTLAND, OREGON Posts: 15	I use synthetc motor oil, does not seem to go burn away like some oils and stays put. 20 weight works great mobil one. For grease i use a molybidium white grease. Please excuse the spelling. Billymac

11-07-2014, 12:36 PM	#6
wmg Junior Member Join Date: Oct 2014 Location: va Posts: 7	tnx for the reply...been using that oil for everything else will give it a go...

12-27-2014, 10:15 AM	#7
spentcase Senior Member Join Date: Mar 2002 Posts: 113	I would echo what others say about quality lubes. They all work effectively. I use FP10 on both polymer and steel/alloy guns and have had no problems on any of them.