How to change the Hammer - Pistolsmith

Go Back   Pistolsmith > Pistol Forum > Kimber Pistols

LinkBack Thread Tools Display Modes
Old 03-21-2008, 04:51 AM   #1
Join Date: Mar 2006
Posts: 1
How to change the Hammer

I have a Aegis ultra and would like to change the hammer to a commander style hammer. Can i do this myself or should i take it to a gun smith.
Remove Ads
Old 03-22-2008, 02:53 PM   #2
Join Date: Dec 2006
Posts: 63
If you're asking this, you should probably take it to a gunsmith. This is not because it's so difficult to swap out the parts but because the new part may or may not fit like the old one did. This could produce an unsafe condition. Try to find a smith who knows the 1911 design.
If you want to have a go at it anyway, a good first step would be to get hold of some literature on how to work on these pistols. There's a bunch of it out there and most is instructive. That should save you some headaches and probably some money. Plus you won't have to, uh, expand your vocabulary.
Hope this helps.
Tom Z

  Pistolsmith > Pistol Forum > Kimber Pistols

Search tags for this page
change hammer in 1911

changing hammer on 1911


how to change a hammer on a 1911

how to change hammer pin on kimber 1911

how to change the hammer on a 1911

how to replace 1911 hammer
replace hammer on 1911
replace the hammer on kimber pro
replacing the hammer on a 1911
Click on a term to search for related topics.

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
AR15 pre-ban barrel change and hammer question... em Semi-Auto Rifles 3 09-08-2003 05:39 PM
mag change, your help needed MI45 Training and Tactics 2 06-05-2002 06:33 PM

Top Gun Sites Top Sites List

Powered by vBulletin 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright © 1999-2012 Pistolsmith. All rights reserved.