disassembly of a para ordnance p7 lda

fsupipeliner · 08-30-2008, 03:08 PM

Can someone point me to directions for completely dis-assembling and re-assembling an LDA. I've gotten a bit more cautious since I completely dis-assembled my dad's 1911 (without any directions for reassembly) 48 years ago. I remember reassembling it by trial and error under his watchful eye. Then came the discussion of why it was necessary to take it apart in the first place.

Anyway, I need to do a detail cleaning and I don't feel inclined to pay a gunsmith to do it.

Thanks.

Tom

jackson · 05-27-2014, 06:58 PM

I realize this is an old thread, but I'm a newbie, and I've just pulled my Para LDA apart (which is why I was snooping this thread). Steve's Pages has an exploded view of a Para LDA, which is about all I've got to go on at this point, so the original inquirey still has a few curious minds wanting to know. If I can't get it back together, I'll put it on the coffee table and tell friends it's an expensive tavern puzzle.

jackson · 06-12-2014, 08:11 PM

Well, it's not going out on the coffee table quite yet. The exploded diagram was quite helpful, but it took a number of tries to get a couple of springs oriented correctly so that it would function properly. I gave it a thorough cleaning, which it needed, and a Graphite Black Cerrakote finish over the shiny stainless. It is a bit tighter in fit, and just a bit sluggish going into battery. I put about fifty rounds through it, and the accuracy is a bit improved, although it will need a few more rounds through it for break-in. My earlier joke about the tavern puzzle turned out to be a fair comparison.

retDAC · 06-13-2014, 12:18 AM

Congrats on the results of your perseverance and Welcome to Pistolsmith!

08-30-2008, 03:08 PM	#1
fsupipeliner Junior Member Join Date: Jul 2007 Location: Houston, TX Posts: 5	LDA Dis-assembly Can someone point me to directions for completely dis-assembling and re-assembling an LDA. I've gotten a bit more cautious since I completely dis-assembled my dad's 1911 (without any directions for reassembly) 48 years ago. I remember reassembling it by trial and error under his watchful eye. Then came the discussion of why it was necessary to take it apart in the first place. Anyway, I need to do a detail cleaning and I don't feel inclined to pay a gunsmith to do it. Thanks. Tom

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
P93DC assembly... oops.	sdaries	Ruger Pistols	3	08-14-2011 02:04 PM
S&W Assembly Question	one eye joe	Smith & Wesson Revolvers	5	03-08-2011 06:49 AM
Assembly -- What Am I Doing Wrong?	MOAMaster	Browning Pistols	7	10-29-2010 08:01 AM
Steyr M series Re-Assembly HELP!!!	NOVA_17	Gun Talk	0	06-17-2004 06:27 PM
Astra assembly	Poohsdad	Gun Talk	0	05-22-2001 05:02 PM

disassembly of a para ordnance p7 lda

how to dissassemble a para lda

lda 1245 disassembly

lda disassembly

para lda disassembly

paraordnance p-10 disassembly

05-27-2014, 06:58 PM	#2
jackson Junior Member Join Date: May 2014 Location: SE Ohio Posts: 3	I realize this is an old thread, but I'm a newbie, and I've just pulled my Para LDA apart (which is why I was snooping this thread). Steve's Pages has an exploded view of a Para LDA, which is about all I've got to go on at this point, so the original inquirey still has a few curious minds wanting to know. If I can't get it back together, I'll put it on the coffee table and tell friends it's an expensive tavern puzzle.

06-12-2014, 08:11 PM	#3
jackson Junior Member Join Date: May 2014 Location: SE Ohio Posts: 3	Well, it's not going out on the coffee table quite yet. The exploded diagram was quite helpful, but it took a number of tries to get a couple of springs oriented correctly so that it would function properly. I gave it a thorough cleaning, which it needed, and a Graphite Black Cerrakote finish over the shiny stainless. It is a bit tighter in fit, and just a bit sluggish going into battery. I put about fifty rounds through it, and the accuracy is a bit improved, although it will need a few more rounds through it for break-in. My earlier joke about the tavern puzzle turned out to be a fair comparison.

06-13-2014, 12:18 AM	#4
retDAC Senior Member Join Date: May 2006 Location: near Huntsville, Ala. Posts: 707	Congrats on the results of your perseverance and Welcome to Pistolsmith!