ruger standard 22 pistol grips

Nascar Fan · 11-03-2010, 02:10 AM

New to the forum, Hi to all.

Are all the grips the same for all models (Standard, I, II, III)? Looking at the parts list on "rugerparts" the grips are shown for model II & III and none that I could find for a Standard. Thanks

22guru · 08-14-2011, 01:21 PM

Hi, No, grips are different between MkI,II,III. Standard(rst4&6) most of them take there own, the grip screw holes are different location and up to a certain year, not sure what year they changed. MKI & II, some grips will fit, some won't. MKIII, these grips will fitboth mk II & III. Now, main reason MKII's wont work on standard and MKI is they dont have a boltstop thumbpiece and the wider head hammer pivot pin. MKI's hammer pivot pin fits flush on each side and the grip panel holds the pin in place. Eventhough the MKII's fit some MKI's, she cut out for the hammer pivot pin does not cover the MKI pin. MKII's will fit a MKIII if you cut out the spot for the mag latch

retDAC · 08-14-2011, 09:30 PM

This is good to know, but why post to an old thread especially when the OP is gone?

one eye joe · 08-15-2011, 08:01 AM

Quote:

Originally Posted by retDAC

This is good to know, but why post to an old thread especially when the OP is gone?

retDAC, IMHO it's a frequent newbee behavior. There seems to be a time in the history of this forum of a lapse into minimal activity, and when I first joined, I found myself responding to ancient threads. (I remember marveling at the "presence" of Austin Behlert) Thankfully, activity has increased and most communication is current. The key is to look @ the posting date--a trick that took me a bit to figure out......

retDAC · 08-15-2011, 09:12 PM

Never did that when a newbee myself on any forum. OTOH, my mother always said I was different!

one eye joe · 08-16-2011, 05:31 AM

OBVIOUSLY, your mom was right..........

22guru · 08-16-2011, 07:49 PM

Par don me

retDAC · 08-16-2011, 10:26 PM

OK you're pardoned!

MicroTecniqs · 12-06-2011, 12:52 PM

Quote:

Originally Posted by retDAC

This is good to know, but why post to an old thread especially when the OP is gone?

My 2 cents: Posting to old threads can be very useful, especially in cases such as this one where the question was never answered. Now the answer is there for the OP if they check back and anybody else who happens along needing the same info. OTOH, an addition to any thread that just repeats what has already been said is just redundant and not really helpful as it doesn't add any information.

one eye joe · 12-06-2011, 01:22 PM

Welcome to the forum, MicroTecniqs.......

11-03-2010, 02:10 AM	#1
Nascar Fan Junior Member Join Date: Nov 2010 Location: Arkansas Posts: 2	Standard Model (22 pistol) grips New to the forum, Hi to all. Are all the grips the same for all models (Standard, I, II, III)? Looking at the parts list on "rugerparts" the grips are shown for model II & III and none that I could find for a Standard. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
High Standard Model H-D Military bull bbl .22lr pistol	Max1991A1	Pistolsmiths	16	06-22-2011 04:03 PM
wood for pistol grips	ROBAK74	New Member Introductions	0	03-20-2010 06:56 PM
Looking For Beretta Pistol Grips	The Shootist	Gun Talk	1	04-23-2005 02:51 PM
HOGUE AUTOMATIC PISTOL GRIPS	cajunman831	Gun Accessories	0	03-04-2004 01:27 PM
Small pistol standard vs Small Pistol Magnum primers	happy	Reloading	2	07-20-2002 09:25 AM

aftermarket ruger standard grips

high standard 22 pistol grips

pistol grip for ruger rst4

ruger standard 22 grips

ruger standard 22 pistol grips

ruger standard 22 pistol grips custom

ruger standard grips

ruger standard model grips

ruger standard pistol grips

08-14-2011, 01:21 PM	#2
22guru Junior Member Join Date: Aug 2011 Location: AZ Posts: 17	Hi, No, grips are different between MkI,II,III. Standard(rst4&6) most of them take there own, the grip screw holes are different location and up to a certain year, not sure what year they changed. MKI & II, some grips will fit, some won't. MKIII, these grips will fitboth mk II & III. Now, main reason MKII's wont work on standard and MKI is they dont have a boltstop thumbpiece and the wider head hammer pivot pin. MKI's hammer pivot pin fits flush on each side and the grip panel holds the pin in place. Eventhough the MKII's fit some MKI's, she cut out for the hammer pivot pin does not cover the MKI pin. MKII's will fit a MKIII if you cut out the spot for the mag latch

08-14-2011, 09:30 PM	#3
retDAC Senior Member Join Date: May 2006 Location: near Huntsville, Ala. Posts: 707	This is good to know, but why post to an old thread especially when the OP is gone?

08-15-2011, 09:12 PM	#5
retDAC Senior Member Join Date: May 2006 Location: near Huntsville, Ala. Posts: 707	Never did that when a newbee myself on any forum. OTOH, my mother always said I was different!

08-16-2011, 05:31 AM	#6
one eye joe Senior Member Join Date: Jun 2009 Posts: 1,080	OBVIOUSLY, your mom was right..........

08-16-2011, 07:49 PM	#7
22guru Junior Member Join Date: Aug 2011 Location: AZ Posts: 17	Par don me

08-16-2011, 10:26 PM	#8
retDAC Senior Member Join Date: May 2006 Location: near Huntsville, Ala. Posts: 707	OK you're pardoned!

12-06-2011, 01:22 PM	#10
one eye joe Senior Member Join Date: Jun 2009 Posts: 1,080	Welcome to the forum, MicroTecniqs.......