Speedfeed stocks - Pistolsmith
Pistolsmith

Go Back   Pistolsmith > Rifle and Shotgun Forum > Shotguns

Reply
 
LinkBack Thread Tools Display Modes
Old 01-29-2004, 07:20 AM   #1
Member
 
Join Date: Oct 2001
Posts: 77
Speedfeed stocks

The time has come to remove the wood and slap on the plastic!

Does anyone have any experience with Speedfeed's shotgun stocks that store extra shells in the stock?

My concern is the shells could jump out of their holding devices under the force of recoil or misuse.

Are Speedfeed any better, worse, or the same as Choate stocks?
 
Remove Ads
Old 01-29-2004, 11:06 AM   #2
SKN
 
Join Date: May 2001
Posts: 35
I've had one of these on my 870 for some time. The stock is durable and has a reduced LOP. The storage tubes for the extra shells have held them secure during firing but on occasion, while loading the tubes the springs will bind and remain in the collapsed position. This is remedied by taking the recoil pad off and unbinding the spring. The recoild pad on mine doesn't fit as tightly to the rear of the stock as I would like and to prevent the stock bolt from working loose during extended firing sessions I applied Lok-Tite to it.
 
Old 03-18-2004, 08:18 PM   #3
 
Join Date: Feb 2004
Posts: 7
Speedfeed stocks

I just bought a used Rem. 870 police from a gun show in Leesport,Pa. that has the speedfeed stock and i love it. Since i bought it, i added a side saddle and an extension tube and a barrel heat shield. All i did was remove the butt pad and clean the springs and the plungers. I've had no problem with mine and i used the stock a number of times now with no real problem.
 
 
Old 03-19-2004, 03:52 AM   #4
 
Join Date: May 2003
Posts: 102
I have installed Speedfeed and Choate.

The speedfeed are well made, but when firing, the added weight of the 4 shells increased the recoil (weight at the rear as opposed to the front).

I prefer Choate stocks, but when building them for others, will install Speedfeed after telling them of my experience.

RePete.
 
Old 03-19-2004, 06:06 PM   #5
Member
 
Join Date: Dec 2003
Posts: 74
I have had a Speedfeed stock on my Mossberg 500 for over a decade now. I am well pleased with it.

The 3" mags will sometimes kick hard enough to dislodge the shells from the stock. I have never experienced this with 2 3/4" shells. To me, that is not a problem, as I only use 2 3/4" anymore.

I find it an elegant solution to the problem of having a few more rounds. Much more attractive than a side saddle or a butt cuff. I like it.
 
Old 03-31-2004, 05:26 PM   #6
 
Join Date: Mar 2004
Posts: 3
speedfeed

we have put on over 1500 of there stocks on different departments shotguns over about 9 years,all speedfeed solid stocks and about 1000 of there extra shell stocks.i like the thickness of the things,as compaired to the factory style of thin stocks.we get different vendors in and try out there items,includeing stocks so i get to try out allot of good stuff,these seam to hold up good when ran over by a police car.it happens.
 
Old 06-29-2004, 08:23 PM   #7
 
Join Date: Nov 2003
Posts: 91
Speedfeed stocks

Great for carrying specialty rounds for rapid access..used to carry slugs on one side--CS ferrets on the other. Wont damage the receiver like a side saddle..back bore the barrel forcing cones to reduce recoil and improve shot groups.
 
Old 06-30-2004, 07:08 AM   #8
 
Join Date: Sep 2001
Posts: 209
I have used the speedfeed for many a year (10+?). I do not recommend them. If you want to make a rapid combat reload, go with a side saddle. You cannot keep your weapon on target and ready to fire when you are trying to pull the rounds from the stock.

Mixing slugs and gas on the same stock? Bad idea. When the SHTF in the real world, are you going to remember which is which under stress? Mixing fatal and less-lethal rounds on the same gun has great potential to get someone killed.
 
Old 07-16-2004, 05:35 AM   #9
 
Join Date: Apr 2002
Posts: 248
speed feed stocks

My main issue with speed feed is they seem to have a high comb. Getting a proper sight picture is tricky. I hear they have remedied this but have not seen the new configuration. My personal preference is Choate.
 
Old 07-16-2004, 06:41 AM   #10
Senior Member
 
Join Date: Apr 2001
Location: People's Republik, Komrade
Posts: 934
I haven't used the one with the storage space for shells, but the Speedfeed stocks are the best I've tried. Fit me like a glove.
 
Reply

  Pistolsmith > Rifle and Shotgun Forum > Shotguns


Search tags for this page

870 speed feed stock removal

,

buttpad for speedfeed stock

,

how to remove the gutt pad from a speed feed gun stock

,

modfying speedfeed 4s stock to browning

,

speedfeed 1 stock what years had bad recoil pads

,

speedfeed 870 stock butt pads

,

speedfeed shotgun stock butt pad

,

speedfeed shotgun stock review

,

speedfeed shotgun stocks review

Click on a term to search for related topics.

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ivory Stocks FarmBoy Gun Accessories 14 11-06-2003 04:52 AM
Guide Gun Stocks N-Frame Guy Big Bore Rifles 9 08-24-2002 02:01 PM
BCP stocks lurker Gun Accessories 0 02-19-2002 01:38 PM
Butlercreek Stocks on BHP in .40 S&W CCFPS Browning Pistols 1 08-05-2001 07:59 AM
Slim Stocks telackey Gun Accessories 5 06-22-2001 11:23 AM

Top Gun Sites Top Sites List


Powered by vBulletin 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright © 1999-2012 Pistolsmith. All rights reserved.