S & W Model 59 Disassembly - Pistolsmith

Go Back   Pistolsmith > Pistol Forum > Smith & Wesson Pistols

LinkBack Thread Tools Display Modes
Old 08-30-2004, 06:27 PM   #1
Join Date: Aug 2004
Posts: 1
S & W Model 59 Disassembly

I cant seem to find any sites with a how to on disassembly for
my model 59 and its due for a cleaning :roll: any links//help would
be greatly appericated ty
Remove Ads
Old 08-31-2004, 03:41 AM   #2
Senior Member
Join Date: Sep 2002
Location: Virginia
Posts: 964
Remove the magazine, inspect the chamber to be certain that the gun is unloaded.

Retract the slide until the slide stop notch is over the slide stop pin, push out the pin, remove the pin.

Ease the slide forward, when the slide passes the disconnector, it will trip the sear and drop the hammer, best to not let the hammer whack the frame, so try to lower the hammer gently.

Remove the slide, compress the guide rod by grabbing it where it meets the bottom lug on the barrel and push it forward, remove the guide rod and spring.

Turn the barrel bushing counter clockwise and remove it, then remove the barrel.

Reassembly is pretty much a reverse of the above. When you go to put the slide on the frame, you will have to push down the little levers at the rear of the frame to get the slide to go on.
Old 02-11-2016, 08:43 AM   #3
Junior Member
RicWiseman's Avatar
Join Date: Jan 2016
Location: Corinth Miss.
Posts: 5
This should help...Watch all the videos..!



  Pistolsmith > Pistol Forum > Smith & Wesson Pistols

Search tags for this page
disassemble model 59 smith wesson
remove a jambed slide from a model 59
s & w model 59 slide removal
s&w 59 barrel bushing is it one part
s&w model 59 assembly
s&w model 59 complete disassembly

s&w model 59 disassembly


smith and wesson model 59 disassembly


smith wesson model 59 disassembly

Click on a term to search for related topics.

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
DW .44 revolver disassembly help? meh92 Dan Wesson Revolvers 4 01-19-2008 10:50 AM
Disassembly instructions for Model 41 Smith & Wesson GR8GIFT Workshop 2 04-06-2005 12:26 PM
M59 disassembly Doctor Sam Smith & Wesson Pistols 1 10-22-2004 09:34 AM
Help with disassembly of 439 9mm ebritt Smith & Wesson Pistols 5 08-27-2003 08:33 PM
Need help with disassembly Coronel Browning Pistols 7 04-22-2002 05:37 PM

Top Gun Sites Top Sites List

Powered by vBulletin 3.8.8
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright © 1999-2012 Pistolsmith. All rights reserved.