1006 guide rod

SamColtFan · 06-18-2006, 12:46 PM

Devel or Detonics?

I recently purchased a S&W 1006 10mm pistol. The pistol was made in 1993 and has fixed factory Novak Trijicon nightsights and a S&W bobbed hammer. Very nice pistol.

My question relates to the recoil spring guide. It has a single recoil spring forward of the barrel recoil guide mounting disc. To the rear of the dics is a short, 1" recoil spring. On the muzzle end of the recoil guide rod is a punched letter D. Who made this full length recoil guide and what are the spring weights?

Any thoughts? Thanks!

Gammon · 06-29-2006, 04:12 PM

I'm not sure what you have for a recoil spring and guide, but I am pretty sure that it was not made by Devel or Detonics. I think they were both out of business by then.
PS I have a 1006 and don't understand how the short spring fits in.

SamColtFan · 06-30-2006, 02:53 PM

The small spring to the rear of the one piece guide is fixed between several metal discs that mount on the bottom of the barrel in a barrel recess. A fixed metal disc to the very rear of the guide has a small spring loaded plunger in the center of the rear face of the disc. The plunger fits into a hole into the frame just forward of the trigger return spring. The longer, removable spring on the front of the recoil guide is typical of a standard recoil setup. The whole set-up is quite impressive but doesn't look S&W to me.

////////////////////////III/////////I- < Fixed Circular disc & spring loaded plunger to hole in frame

^ Front Spring.......................^Discs....^ Contained Spring

Thanks for your reply.

Gammon · 07-06-2006, 10:18 PM

Quote:

Originally Posted by SamColtFan

The small spring to the rear of the one piece guide is fixed between several metal discs that mount on the bottom of the barrel in a barrel recess. A fixed metal disc to the very rear of the guide has a small spring loaded plunger in the center of the rear face of the disc. The plunger fits into a hole into the frame just forward of the trigger return spring. The longer, removable spring on the front of the recoil guide is typical of a standard recoil setup. The whole set-up is quite impressive but doesn't look S&W to me.

////////////////////////III/////////I- < Fixed Circular disc & spring loaded plunger to hole in frame

^ Front Spring.......................^Discs....^ Contained Spring

Thanks for your reply.

I'm confused, a picture would help; this sounds nothing like my 1006.

TonyRumore · 03-24-2015, 01:38 PM

Detonics used 2 full length counter wound springs in their 5" 1911's.

Tony

06-18-2006, 12:46 PM	#1
SamColtFan Join Date: May 2001 Posts: 47	Devel or Detonics recoil spring guide on S&W 1006? Devel or Detonics? I recently purchased a S&W 1006 10mm pistol. The pistol was made in 1993 and has fixed factory Novak Trijicon nightsights and a S&W bobbed hammer. Very nice pistol. My question relates to the recoil spring guide. It has a single recoil spring forward of the barrel recoil guide mounting disc. To the rear of the dics is a short, 1" recoil spring. On the muzzle end of the recoil guide rod is a punched letter D. Who made this full length recoil guide and what are the spring weights? Any thoughts? Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Recoil spring guide	Tom-C	Browning Pistols	3	02-20-2009 12:54 PM
G17 guide rod/recoil spring replacement	dms	Glock Pistols	4	02-24-2004 04:01 AM
Recoil Spring Guide...	Stephen A. Camp	Browning Pistols	4	11-19-2002 02:33 AM
recoil spring guide peened	moredes	M1911 Pistols	5	10-15-2002 11:28 AM
G30 recoil spring/ guide rod assembly	Hobbes	Glock Pistols	5	10-27-2001 02:14 PM

1006 guide rod

recoil spring guide assembly for s&w 1006

recopi spring guide rod for s&w 1006

replacement guide rod for s&w 1006

s&w 1006 recoil spring

s&w 1006 recoil spring weight

s&w 4006 recoil springs & guide rods

s&w 4006 solid recoil rod

s&w 4006 spring guide

06-29-2006, 04:12 PM	#2
Gammon Join Date: Jul 2005 Posts: 66	I'm not sure what you have for a recoil spring and guide, but I am pretty sure that it was not made by Devel or Detonics. I think they were both out of business by then. PS I have a 1006 and don't understand how the short spring fits in.

06-30-2006, 02:53 PM	#3
SamColtFan Join Date: May 2001 Posts: 47	The small spring to the rear of the one piece guide is fixed between several metal discs that mount on the bottom of the barrel in a barrel recess. A fixed metal disc to the very rear of the guide has a small spring loaded plunger in the center of the rear face of the disc. The plunger fits into a hole into the frame just forward of the trigger return spring. The longer, removable spring on the front of the recoil guide is typical of a standard recoil setup. The whole set-up is quite impressive but doesn't look S&W to me. ////////////////////////III/////////I- < Fixed Circular disc & spring loaded plunger to hole in frame ^ Front Spring.......................^Discs....^ Contained Spring Thanks for your reply.

03-24-2015, 01:38 PM	#5
TonyRumore Junior Member Join Date: Oct 2010 Location: Inola, OK Posts: 5	Detonics used 2 full length counter wound springs in their 5" 1911's. Tony