gunsmith for p99 - Pistolsmith

Go Back   Pistolsmith > Pistol Forum > Walther Pistols

LinkBack Thread Tools Display Modes
Old 10-09-2002, 10:20 PM   #1
Join Date: Aug 2002
Posts: 3
gunsmith for p99

can you recommend an excellent gunsmith for a p99 trigger that feels gritty in da mode?
Remove Ads
Old 10-12-2002, 02:58 AM   #2
Join Date: Nov 2001
Posts: 111
The only one that I've heard of that's any good is Earl's Repair Service, Inc. in MA but be prepaired to spend BIG $'s for his services. :x

How many rounds do you have thru your P99? The trigger will be better, smoother, after a few hundred.

I have 4 P99's and the more I shoot them the better they feel.
Old 10-26-2002, 09:12 PM   #3
Join Date: Dec 2001
Posts: 39
Teddy Jacobson
Old 10-27-2002, 06:11 AM   #4
Join Date: Oct 2002
Posts: 7
My post on the Walther page

was just messing around with my P99 and decided to take the striker out for the 1st time. the striker assembly is very similar to the Glock. i took the P99 spring off and it looked like a Glock striker spring, except for length. so, i have a bunch of spare glock parts and put a Glock spring in the P99. i measured the SA pull stock (3lb 12.6oz) and with a factory Glock spring (2lb 9.6oz). will go to the range tomorrow to try it out with the Win Value Packs (115gr) and Speer Gold Dots (124gr) that i normally shoot. if all goes well, i'll try one of the 4# Wolff striker springs. in the 3weeks that i've owned the P99 i've got about 500rds through it, so the trigger is starting to get less gritty.

went to the range today and put 200rds of Win Value Pack and 50 Speer Gold Dots through the P99. Did not have 1 malfunction. i like the lighter feel of the trigger. the DA is measuring in at 5lb 4.3oz. all measurements were taken from a 10 pull average.

Just installed the 4# Wolff Spring and here are the measurements:
DA 4lb 13.9oz
SA 2lb 5.6oz

  Pistolsmith > Pistol Forum > Walther Pistols

Search tags for this page

glock striker spring in p99

gunsmith walther p99

p99 striker assembly


p99 striker spring


striker assembly for walther p99 1st gen


walther p99 doa striker spring

walther p99 gunsmith

walther p99 striker


walther p99 striker assembly

Click on a term to search for related topics.

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gunsmith help MPA249 Pistolsmiths 1 01-03-2007 07:04 AM
Need a gunsmith dzrtram Gun Talk 1 10-22-2003 08:06 AM
How does one become a gunsmith? hmp32 Pistolsmiths 11 12-15-2002 09:04 AM
SM&A Gunsmith nrifenbark Pistolsmiths 3 07-20-2002 09:45 PM
Sig gunsmith? Hoser SIG Pistols 8 06-10-2001 11:09 AM

Top Gun Sites Top Sites List

Powered by vBulletin 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright © 1999-2012 Pistolsmith. All rights reserved.