Checkering - Pistolsmith
Pistolsmith

Go Back   Pistolsmith > Pistolsmith Forum > Workshop

Reply
 
LinkBack Thread Tools Display Modes
Old 03-31-2001, 07:37 PM   #1
Senior Member
 
Join Date: Mar 2001
Location: Illinois
Posts: 148
I've been trying to get the hang of metal checkering, even though I KNOW everybody is doing it on a mill now. I just want to see if I can.

So far, I haven't had much luck. I suspect I shouldn't be starting at 30x30, though. Anybody got any tips for a beginner?

Oh, I did come up with one idea for practice. I bought a half-dozen stainless 3/4" nuts, and try to checker each flat. Lots of practice for a buck, and they're easy to clamp in the vise.

Larry
 
Remove Ads
Old 03-31-2001, 09:18 PM   #2
 
Join Date: Mar 2001
Posts: 239
Try practicing with 20 lpi files. I've been practicing on round steel bar stock from Brownell's. MSC has stock for even cheaper, but I didn't want 6' of it. I have 1" diameter, but I think 7/8" is closer to a 1911 front strap.
 
Old 04-01-2001, 12:19 AM   #3
 
Join Date: Mar 2001
Posts: 163
Larry- nice sig line! :smile:
 
 
Old 04-01-2001, 12:27 AM   #4
Guest
 
Posts: n/a
Speaking of checkering... "IF" I happen to "win" a little ebay auction for a flat MSH with loop, what's the going rate to get it checkered, or even serrated? probably looking at 20 lpi, maybe 25... TIA

Patrick
 
Old 04-02-2001, 02:38 AM   #5
 
Join Date: Apr 2001
Posts: 50
DT Guy

I've got a permanent squint and sore elbow, not to mention a left thumb with poor circulation, so feel qualified to advise you.
Get a piece of either 1"diameter heavy wall pipe or solid round bar, mill or file it to 3/4" wide - this gives you the appearance and width of a 1911 front strap. Get a 20LPI Brownells checkering file. Get Wilson's 4 volume video set on gunsmithing the 1911 auto (that one taught me a better way after 12 years). Get one of those Magni-visors so you can see what you're doing. At least 3 power, probably if you're like me - past 50 - a 5 power plus reading glasses - and here's the most important tip. Use DYKEM or similar marking dye to coat everything between every pass so you can see the cuts you are making. Last item, have an old Heinie gun there so you know what it's SUPPOSED to look like.

Good luck (and it actually is cool when you do it right).

Gunnar

BTW, you aren't finished when all the passes are perfect with the checkering file, now you go to the single files, starting with coarse,going to the finest to point up the tips and add that extra quality that's only seen under a magnifying glass, usually by another gunsmith. Go to 30 LPI later, MUCH later.
 
Old 04-02-2001, 04:08 AM   #6
Guest
 
Posts: n/a
Yow!

Sounds to me like Gunnar has been there.
In them little 'trenches' between the steel pyramids.
But checkering by hand past 50 yrs old???
Gunnar musta started late.......LOL!!
 
Reply

  Pistolsmith > Pistolsmith Forum > Workshop


Search tags for this page

1911 checkering files

,

re checkering file

Click on a term to search for related topics.

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Checkering a CZ-75B Boogieman CZ Pistols 8 11-27-2004 07:39 AM
Checkering Boricua322 CZ Pistols 5 03-16-2003 09:24 AM
Checkering on the MK9 denfoote Kahr Pistols 10 12-03-2002 10:41 PM
Checkering abnranger Pistolsmiths 1 03-05-2002 04:23 PM
checkering 30 LPI PigPen M1911 Pistols 7 01-03-2002 11:09 PM

Top Gun Sites Top Sites List


Powered by vBulletin 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright © 1999-2012 Pistolsmith. All rights reserved.